Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Denver
Garage door installation in Denver typically costs $700-$2,200 for a complete new door, with most single-car doors landing between $900 and $1,500 and double-car doors between $1,200 and $2,200 depending on material, insulation, and hardware. Servo Garage Doors Littleton serves all of Denver with flat, written pricing before any work starts, per Clause 1 of The Haven Standard. Call (720) 636-7083 and you’ll get a real person, a named technician, and an installation date, not a callback window.
We know Denver’s housing stock because we work in it every week. From the 1960s ranches in Harvey Park to the 2010s three-car bays in Central Park, the garage doors here take a beating that most cities never see. Hail, UV, and Chinook winds change what you should install and how fast it wears. That’s what this page is about.
Why Servo Garage Doors Littleton Is Denver’s Preferred Garage Door Installation Company
Since 2015, we’ve installed and repaired more than 18,000 garage doors across the metro, every one with a written price before work started and a documented photo record when the technician left. That’s not a slogan. That’s Clause 4 of The Haven Standard, the rule Marcus Deller built Servo on: you see the failed part before anyone quotes a replacement. The documentation does the persuading, not us.
Denver homeowners tend to research before they call. They read the three-star reviews. They want the price range on the page, not a callback. We write for that customer because that’s the customer we actually want to work with. Our technicians are background-checked and uniformed, they show up with the license on the truck and the parts in the bay, and they leave you with photos of what they found and what they did, plus a written warranty on the work.
Dispatch and scheduling for our Denver service area is coordinated from the brand’s Denver office, so when you call, the person answering understands your neighborhood, your door age, and your weather. We’re in Lakewood one afternoon, Washington Park the next morning, and Stapleton after that. Same crews, same van stock, same standard.
Our Garage Door Installation Services in Denver
Installation here means more than swapping a door. It means choosing a door that survives Hail Alley, seals against January draft, and doesn’t strain the opener when a Chinook drops the temperature 50 degrees overnight. Here’s what that looks like in practice.
New Door Installation
A full new door installation in Denver runs $700-$2,200. The range is wide because Denver’s housing stock is wide: a basic single-car steel door for a 1968 Englewood ranch costs less than a double-car, R-16 insulated door for a 2017 Central Park three-bay. We quote a flat, written price and written scope before any work begins, every time. You’ll know the door model, the insulation value, the hardware, and the labor cost before you approve anything.
Single Car Door Installation
Most single-car garages in Denver’s older neighborhoods, think Virginia Village, Athmar Park, parts of University Hills, were built for a 16×7 or 16×8 door that’s now 30 to 50 years old. We install single-car doors starting around $900, and we’ll match the door to the home rather than just replacing what was there. An insulated steel door with a high-cycle torsion spring changes how that garage works in February.
Double Car Door Installation
Double-car doors in Denver typically run $1,200-$2,200 installed. In Highlands Ranch and Centennial, where homes from the 1990s and 2000s dominate, the doors are wider, often 16 or 18 feet, and heavily used. Those doors benefit from R-12 to R-16 insulation and a torsion spring system rated for 20,000-plus cycles, not the 10,000-cycle default many homeowners inherit.
Custom Garage Door Installation
Custom doors are where Denver’s more detailed homes, Cherry Creek, Hilltop, parts of Wash Park, need more than an off-the-shelf panel. We order custom sizes, wood-look steel, full-view glass sections, and doors matched to existing trim and carriage hardware. A custom installation in Denver generally starts around $1,800 and goes up from there based on size, material, and glass. We’ll tell you the cost before you commit, in writing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Denver
We install and service all eight major brands, including Genie, Clopay, Amarr, and Wayne Dalton, and we keep common parts on the trucks so a Denver installation isn’t delayed by a regional warehouse order. Clopay and Amarr steel doors hold up well under Denver’s hail and UV, and Wayne Dalton’s mid-tier insulated doors are a solid value for the 1990s ranch stock in Aurora and Lakewood. You can see our full brand coverage on our Garage Door Installation page.
Common Garage Door Installation Problems We See in Denver Homes
- Builder-grade doors in Highlands Ranch and Central Park. Many homes built in the last 10 to 15 years came with extension springs rated for only 5,000 cycles. Under Denver’s freeze-thaw cycling, those snap within 3 to 5 years. We replace them with high-cycle torsion springs during installation, which is standard on our doors.
- Mile High UV degradation. Denver sits about 25% higher in UV radiation than sea level, which eats rubber bottom seals and weatherstripping measurably faster than manufacturer intervals predict. That lets snow and ice build under the door, which warps panels over time. We inspect and replace the entire sealing system during an install.
- Chinook thermal cycling. A 40 to 60 degree temperature swing in six hours flexes torsion springs far more aggressively than stable-winter cities see. That imbalance strains the opener, strips gears, and causes metal-on-metal binding by mid-winter. We set spring tension for Denver’s range, not the manufacturer’s sea-level default.
- Hail-dented panels on otherwise functional doors. Denver sits squarely in Hail Alley, and a single storm dropping golf-ball hail across the southeast suburbs generates dozens of panel-replacement calls in 48 hours. We document hail damage with photos and work with your insurance claim, a skill most national installers simply don’t develop because their markets don’t demand it.
Pricing for Garage Door Installation in Denver, CO
A typical garage door installation in Denver runs $700 to $2,200, and here’s how that breaks down by line item:
| Service | Denver Price Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Spring Repair | $180-$340 |
| Opener Installation | $250-$550 |
| Panel Replacement | $250-$500 |
What moves your price within those ranges: door width, material, insulation R-value, spring type and cycle rating, and whether the opener gets replaced at the same time. A double-car, R-16 insulated steel door in Central Park costs more than a single-car, non-insulated door in Athmar Park. The written quote you approve is the price you pay, no line-item surprise on install day. That’s the entire point of Clause 1.
We Also Serve Cities Near Denver
In addition to everything on this page for Garage Door Installation in Denver, our crews serve Aurora, Englewood, Littleton, and Westminster with the same written pricing, photo documentation, and live phone coverage. If you’re in one of those cities, the process is identical: call, get a flat written price, schedule the install.
Serving Denver, CO - Our Local Coverage Area
We’re based in the Denver area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Denver
In Denver, torsion springs rated for 10,000 cycles typically last 6 to 9 years, but Chinook swings that shift temperatures 40-60°F in hours can cut that to 5 to 7 years on heavily used doors. Standard builder springs rated for 5,000 cycles often snap within 3 to 5 years in our climate. We install high-cycle torsion springs during any installation in Denver, and we set tension for the thermal range our winters actually deliver. If you’re at the 5-year mark on a builder door, call (720) 636-7083 and we’ll measure the springs and tell you what we find before quoting anything.
Most Denver homeowner’s policies cover hail damage to garage door panels as part of the dwelling coverage, minus your deductible, and State Farm and USAA both process these claims regularly in Hail Alley. The key is documentation: insurers want dated photos of the dents, panel measurements, and a written estimate. We photograph the damage on site and give you what you need to file the claim cleanly, and panel replacement runs $250-$500 per panel in Denver. Bring in another company’s written estimate and we’ll give you a Free Second Opinion, no coupon required.
Builder-grade garage doors in Denver are usually non-insulated or minimally insulated steel with R-6 or less, thin gauge metal, and extension springs, and they let in cold air because the bottom seal and weatherstripping have degraded from UV exposure. Denver’s Mile High altitude delivers about 25% more UV than sea level, so seals that should last 5 years are often cracked and stiff at 3. An insulated door with R-12 to R-16, combined with new seals and a torsion spring system, changes how that garage holds heat during a January cold snap. Call (720) 636-7083 for a free estimate on an upgrade.
Yes, a smart opener like LiftMaster’s myQ or Genie’s Aladdin Connect can be installed on most existing doors, including doors from the 1990s and 2000s, as long as the door itself is balanced and the opener rail is compatible. The catch in Denver is that if your door is imbalanced from years of Chinook thermal cycling, pairing a smart opener onto a strained door will burn out the new opener’s gears within a season or two. We check door balance, spring condition, and opener compatibility before we recommend anything, and opener installation in Denver runs $250-$550.
Steel with an insulated core is the best material for Denver’s conditions, specifically a double-steel or steel-and-polyurethane sandwich construction in the R-12 to R-16 range. Hail will dent steel, but dents are easier to claim against insurance than cracked wood or shattered fiberglass, and UV fades wood and degrades seals regardless of finish. Wood doors warp from Denver’s freeze-thaw cycles at the threshold, and they need far more upkeep than most homeowners want. For most Denver homes, an insulated steel door from Clopay, Amarr, or Wayne Dalton is the right call. Call (720) 636-7083 and we’ll walk you through options at your price point, in writing, before you commit.
Written by Marcus Deller, Owner at Servo Garage Doors Littleton, serving Denver since 2015.